10 Ton10 Ton Forklift for Rent in Abu Dhabi
A 10 tonne forklift with a powershift transmission, 1.8 metre forks and 6 metres of lift. It is a container and heavy steel machine, at its best in an open yard, on a quay or in a laydown area. Powershift lets the driver change direction under load without stopping the truck, which is worth having over a full shift of shuttle work.
Price on requestTell us the dates and the site and we will price it
Get Quote on WhatsAppClick above to get an instant quote from our team
Specifications
| Capacity | 10 Ton |
| Lift Height | 6.0 m |
| Fork Length | 1.8 m |
| Engine Type | Diesel |
| Transmission | Powershift |
| Turning Radius | 3.8 m |
About the Forklift 10 Ton
The 10 ton is a container and steel machine. At this size a forklift is no longer moving stock around. It is handling single heavy items, and the working pattern changes with it: fewer lifts, each one planned. It is the first truck in our range with a powershift transmission rather than a straight automatic. Powershift lets the driver change direction under load without stopping the machine, which is what you want when shuttling repeatedly between a trailer and a stack. Over a shift of container work that is a meaningful difference in throughput, and it is easier on the driveline than fighting an automatic. Forks are 1.8 m and lift height is 6 metres. The turning radius is 3.8 m, which is a large footprint. This machine wants an open yard, a quay or a laydown area, not a compound with vehicles parked in it. As always the rated capacity assumes a standard load centre and full capacity is not available at full height. With loads of this weight the difference between the badge figure and the real chart figure is measured in tonnes, so it is worth confirming before the machine is booked rather than on the day.
What it is good for
- Container handling: loading, unloading and repositioning in a yard or laydown area
- Heavy steel sections, plate and coil
- Single heavy items where a crane would be over-specified but a 5 or 8 ton truck is not enough
- Repetitive shuttle work between trailer and stack, where the powershift transmission earns its keep
- Precast, tanks and skid-mounted plant within capacity
What it is not for
- Any confined space. A 3.8 m turning radius needs an open yard
- Warehouse interiors, where size, weight and diesel exhaust all rule it out
- Loads at full height. Six metres is the maximum reach, not the height at which ten tonnes is available
What the site needs
An open, firm, load-bearing yard with room for a 3.8 m turning radius plus the load. Confirm the surface will take the concentrated wheel loads of a machine this size carrying near its rating, particularly on reclaimed or recently made-up ground. Wide, clear access for the truck to arrive and to work along.
Common questions about the Forklift 10 Ton
Can it lift a loaded shipping container?+
That depends entirely on the container and what is in it, and it is the question to settle before booking. A ten tonne rating is not a promise about any particular container. Give us the gross weight, the container size, and how you need it picked up, and we will check it against the chart.
What does powershift actually give me?+
The driver can change direction under load without bringing the machine to a stop. On repetitive shuttle work, trailer to stack and back all shift, that is a real gain in throughput, and it is kinder to the driveline than working an automatic hard. On occasional single lifts you would barely notice it.
How much space does it need to work?+
More than most people allow for. Turning radius is 3.8 metres before you add the length of the load, so the practical footprint is well over eight metres of clear width to turn in comfortably. It suits an open yard, a quay or a laydown area rather than a compound with vehicles in it.
Should I hire this or a crane?+
A forklift is quicker to set up and cheaper by the day, and it can travel with the load. A crane reaches over obstacles and lifts higher. If the item has to go up rather than across, or over something, it is a crane job. If it has to travel across a firm yard at low level, this is the cheaper machine. Describe the move and we will say which.
Not the right machine?
Compare the Forklift 10 Ton against the other forklift sizes we hire, or go back to the forklift for rent in abu dhabi page, or browse the full catalog.
