8 Ton8 Ton Forklift for Rent in Abu Dhabi
An 8 tonne diesel forklift with 1.6 metre forks and 5.5 metres of lift. This is the size hired for machinery, transformers and dense steel rather than for pallet work. The figure to plan around is the 3.2 metre turning radius, which rules the machine out of a lot of existing buildings, so walk the route before booking it.
Price on requestTell us the dates and the site and we will price it
Get Quote on WhatsAppClick above to get an instant quote from our team
Specifications
| Capacity | 8 Ton |
| Lift Height | 5.5 m |
| Fork Length | 1.6 m |
| Engine Type | Diesel |
| Transmission | Automatic |
| Turning Radius | 3.2 m |
About the Forklift 8 Ton
Eight tonnes is where a forklift stops being a warehouse machine and becomes plant. This is the size hired for moving machinery, transformers, dense steel and loads that a 5 ton truck can lift on paper but should not be asked to. The specification that matters most here is not the capacity, it is the 3.2 m turning radius. That is nearly a metre more than the 3 ton needs, and it rules the machine out of a lot of existing buildings. Before booking one, walk the route it has to take: through the gate, round the corner and into the bay, rather than only measuring where it finishes up. Forks are 1.6 m, long enough to take a machine skid or a deep crate without the load overhanging the tips, which is where accidents happen. Lift height is 5.5 metres. As with every forklift, the rated capacity assumes the load sits close to the carriage and drops as it moves forward or as the mast rises, so eight tonnes at ground level on a compact pallet is not eight tonnes at five metres on a long one. Ground bearing also starts to matter at this weight: the truck's own mass plus the load goes through four contact patches.
What it is good for
- Moving machinery, plant and transformers around an industrial site
- Dense loads such as steel plate, billet and castings, which are heavy for their size
- Loading and unloading heavy goods vehicles where the pallets are at the top of the weight range
- Workshop and fabrication yards handling long or crated assemblies on 1.6 m forks
- Jobs where a 5 ton truck would be working at the limit of its chart
What it is not for
- Confined yards and existing warehouse aisles, where the 3.2 m turning radius needs planning for
- Indoor work in an occupied building. Diesel only
- Ground that has not been checked. Truck plus load at this weight concentrates onto four wheels
What the site needs
Firm, load-bearing hard standing along the whole route, not just at the working position. Turning space for a 3.2 m radius plus the load. Check gate widths and any corner the truck has to negotiate loaded, and check overhead clearance for the mast both extended and retracted.
Common questions about the Forklift 8 Ton
Why choose the 8 ton over the 5 ton?+
Because the load is dense, or because the 5 ton would be working near the top of its chart. A forklift asked to lift close to its rating all shift is a slower and less forgiving machine than one with headroom. The 8 ton also has 1.6 m forks against 1.4 m, which matters for skids and crated assemblies. The cost is space: 3.2 m of turning radius against 2.8 m.
Will the ground take it?+
That is the right question to ask at this size, and it depends on your surface. The truck's own weight plus the load passes through four wheels, so the pressure at each contact patch is high. Established concrete and asphalt are normally fine. Slabs over basements or voids, recently backfilled ground and anything above buried services need checking before it arrives.
Can it handle a load longer than the forks?+
Sometimes, but it changes the calculation. A load overhanging 1.6 m forks moves its centre of gravity forward, which derates the truck, and it becomes unstable at the tips. If what you are moving is longer than the forks, tell us the dimensions. A fork extension or a different machine may be the safer answer.
How high will it lift eight tonnes?+
Not to 5.5 metres. That figure is the maximum lift height, not the height at which full capacity is available. Residual capacity falls as the mast rises on every forklift. If you need weight at height rather than weight at ground level, that is the number to give us, and we will check it against the chart before anything is booked.
Not the right machine?
Compare the Forklift 8 Ton against the other forklift sizes we hire, or go back to the forklift for rent in abu dhabi page, or browse the full catalog.
